ReadyMadeRC
RMRC ANACONDA - KIT
| Wingspan | 2,060mm |
| Wing Area | Approx. |
| Length | 1,410mm |
| Motor | 35-48 800-1000kv Brusless outrunner |
| Propeller | 13x6.5 E or 14x5.5 E (Not included) |
| ESC | 60-80A ESC with switch mode BEC |
| Servos | 3x 30g and 2x 17g Metal Gear Digital |
| Flap servos | HS-81 |
| Battery | Li-Po 4s 5,000mAH - 20,000mAH (Additional nose weight needed with smaller batteries) |
| Center of Gravity | 1/3 of wing from leading edge at the main spar |
| Approximate flight duration | 45 minutes to over an hour depending on configuration |
| Fuselage dimensions (Inside) | L 66cm (26.5") x W 15cm (6") x H 8cm (3") |
| RcGroups.com Unboxing Video with Jim Graham | (PNP version shown) |
Features:, , Specifications:, , Control:, Width, Looking inside the fuselage:, , Notes:,
Anaconda KIT After months of testing, we are proud to ...ReadyMadeRC
RMRC ANACONDA - PNP (WITH INSTALLED MOTOR, ESC, AND SERVOS)
| Wingspan | 2,060mm |
| Wing Area | Approx. 4,900cm |
| Length | 1,410mm |
| Motor | RMRC Tiger Motor Brushless Outrunner AT3520-5, 800kv (6mm prop adapter shaft) |
| Propeller (sold separately) | Recommend |
| ESC | RMRC Tiger Motor 80A ESC with switch mode BEC (T-Plug connector) |
| Servos | 3x 30g and 2x 17g Metal Gear Digital (does not include 2x servos for flaps) |
| Recommended Flap servos | HS-81 |
| Battery | Li-Po 4s 5,000mAH - 20,000mAH (Additional nose weight needed with smaller batteries) |
| Center of Gravity | 1/3 of wing from leading edge on the main spar |
| Approximate flight duration | 45 minutes to over an hour depending on configuration |
| Fuselage dimensions (Inside) | L 66cm (26.5") x W 15cm (6") x H 8cm (3") |
Features:, , Specifications:, , RMRC's Setup for the Anaconda:, , RcGroups.com Unboxing Video with Jim Graham:, , Looking inside the fuselage:, , Notes:, , Can be broken down for transport:, Picture courtesy of ducatirdr from RCGroups.com,
Anaconda PNP - with installed Motor, ESC, and Servos After ...ReadyMadeRC
200 QX BNF WITH SAFE
| Type | Quad-Copter |
| Main Rotor Diameter | 4.45 in (113mm) |
| Length | 5.59 in (142mm) |
| Kit/ARF/RTF | BNF |
| Experience Level | Intermediate |
Is Assembly Required: No,
Features SAFE™ Technology equipped Three flight modes High performance brushless ...ReadyMadeRC
CARBON-Z CUB BNF BASIC
| Wingspan | 84.6 in (215 cm) |
| Overall Length | 55.8 in (142 cm) |
| Wing Area | 1100 sq. in. (71.0 sq. dm.) |
| Flying Weight | 8.15 lb (3.70 kg) |
| Motor Size | 50-size brushless outrunner (installed) |
| Radio | 6+ channel DSM2/DSMX transmitter (required) |
| Servos | (4) 26-gram MG mini servos, (2) 13-gram micro servos (installed) |
| CG (center of gravity) | 4.72 in (120mm) back from leading edge of wing |
| Wing Loading | 17 oz/sq ft |
| Prop Size | 15 x 5.5 Electric (included) |
| Speed Control | 60-amp brushless (installed) |
| Recommended Battery | 22.2V 6S 3200mAh LiPo (required) |
| Flaps | Yes |
| Approx. Flying Duration | 7 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
| Spinner Size | 2.64 in (67mm) |
Optional Accessories:, - Float set (EFL1045016), Retracts: No,
Features Easy-to-complete final assembly Quique Somenzini design and attention to ...ReadyMadeRC
PARKZONE ARCHER BNF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | AR400 4-channel receiver (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
PARKZONE - MOSQUITO MK VI BNF PKZ6350
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
RADIAN PRO PNP
| 5-channel control | aileron, elevator, flaps, rudder and throttle |
| Wingspan | 78.5in (2000mm) |
| Overall Length | 45.0 in (1140mm) |
| Flying Weight | 34.6oz (980g) |
| Motor Size | 480 Outrunner Brushless Motor, 960Kv |
| CG (center of gravity) | 2.75 in (70mm) back from leading edge of the wing at the root |
| Prop Size | 9.75 x 7.5 Folding Prop |
| Speed Control | E-Flite 30Amp Pro Switch-Mode Brushless ESC |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
SPORT CUB PNP
| Wingspan | 51.0 in (1300mm) |
| Overall Length | 34.0 in (865mm) |
| Flying Weight | 33.3 oz (945 g) |
| Motor Size | 480 Brushless Motor 960Kv |
| Radio | 4+ channel (5+ channel for optional flaps) (required) |
| Prop Size | 9 x 6 |
| Speed Control | 18 amp brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 1300mAH LiPo battery (required) |
| Flaps | Optional |
| Landing Gear | Yes |
| Steering | Yes |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE - SPORT CUB BNF PKZ6880
| Wingspan | 51.0 in (1300mm) |
| Overall Length | 34.0 in (865mm) |
| Flying Weight | 33.3 oz (945 g) |
| Motor Size | 480 Brushless Motor 960Kv |
| Radio | 4+ channel (5+ channel for optional flaps) (required) |
| Prop Size | 9 x 6 |
| Speed Control | 18 amp brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 1300mAH LiPo battery (included) |
| Flaps | Optional |
| Landing Gear | Yes |
| Steering | Yes |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
UMX BEAST 3D BNF BASIC
| Wingspan | 14.7 in (374mm) |
| Overall Length | 15.7 in (400mm) |
| Wing Area | 83.8 sq in (54.2 sq dm) |
| Flying Weight | 2.54 oz (72 g) |
| Motor Size | BL180 2500Kv brushless outrunner |
| Radio | 4-channel minimum |
| Trim Scheme Colors | Black, Red, Silver |
| CG (center of gravity) | 19mm back from leading edge of bottom wing |
| Wing Loading | 3.4 oz/sq ft (1.01 g/sq dm) |
| Prop Size | 5 x 2.75 inch |
| Recommended Battery | 2S 7.4V 180mAh Li-Po |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Approx. Flying Duration | 5 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Indoor/Outdoor |
Is Assembly Required: No,
Seize the UMX™ Beast® 3D, Equipped with AS3X® Technology, and ...ReadyMadeRC
PARKZONE - T-28 TROJAN PNP PKZ4475
| Aileron | 3/8 inch (9.5mm) |
| Elevator | 1/2 inch (13mm) |
| Rudder | 5/8 inch (16mm) |
| Aileron | 1/2 inch (13mm) |
| Elevator | 5/8 inch (16mm) |
| Rudder | 7/8 inch (22mm) |
| Wingspan | 44 in (1118mm) |
| Overall Length | 36 in (914mm) |
| Flying Weight | 30 oz (875 g) |
| Motor Size | PKZ 480 960Kv outrunner brushless motor |
| Radio | Minimum 4-channel recommended (not included) |
| Servos | 3-wire servos (included) |
| Trim Scheme Colors | White with black, red, and blue |
| Prop Size | 9.5 x 7.5 |
| Speed Control | E-flite 30A Pro Brushless ESC with Switch Mode BEC (EFLA1030) |
| Recommended Battery | Minimum 3-cell 1800mAh Li-Po battery (not included) |
| Scale | Warbird |
| Landing Gear | Wire nose gear and main gear, foam wheels |
| Steering | Steerable nose gear |
All that's needed to complete:, Radio, battery, charger, and receiver, All that's needed to complete:, Radio, battery, charger, and receiver, X-Port: No,
Powerful, High-Performance Historical Warbird Features Steerable nose gear and fixed ...ReadyMadeRC
MOSQUITO MK VI PNP
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE ARCHER RTF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | DX4e 4-channel transmitter (included) |
| Servos | SV80 servos (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
VOLANTEX RC - RANGER EX 757-3 (PNP)
Wingspan:, 1980mm (77.9 in), Overall Length:, 1170mm (46 in), Flying Weight(without battery):, 1500g, Prop Size:, 1060 Propeller, Motor Size:, 3715 (1000kV) powerful out runner brushless motor, Speed Control :, Easy-Plug 40A Switch-mode BEC brushless ESC, Recommended Battery:, 11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Possibly More), Charger:, Not included, Flaps:, Yes (Servos not included), Retracts:, No, Radio:, 2.4Ghz 6-Channels, Minimum Age Recommendation:, 14 years, Experience Level:, Beginners ~ Expert, Recommended Environment:, Outdoor, Assembly Time:, Less than half hour, Is Assembly Required:, Yes,
Key Features Now includes plastic hinges in horizontal stabilizer Big, ...ReadyMadeRC
VOLANTEX RC - RANGER EX 757-3 (KIT)
| Note | Kit does not include Motor/ESC/Servos |
Wingspan:, 1980mm (77.9 in), Overall Length:, 1170mm (46 in), Flying Weight(without battery):, 1500g, Prop Size:, 1060 Propeller, Motor Size:, 3715 powerful out runner brushless motor, Speed Control :, Easy-Plug 40A Switch-mode BEC brushless ESC, Recommended Battery:, 11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Possibly More), Charger:, Not included, Flaps:, Yes (Servos not included), Retracts:, No, Radio:, 2.4Ghz 6-Channels, Minimum Age Recommendation:, 14 years, Experience Level:, Beginners ~ Expert, Recommended Environment:, Outdoor, Assembly Time:, Less than half hour, Is Assembly Required:, Yes,
Key Features Now includes plastic hinges in horizontal stabilizer Big, ...